[1] Zhang, Z., Wang, X., Yan, Y., "A review of the state-of-the-art in electronic cooling", e-Prime-Advances in Electrical Engineering, Electronics and Energy, Vol. 1, p. 100009, 2021. https://doi.org/10.1016/j.prime.2021.100009

[2] Murshed, S. S., De Castro, C. N., "A critical review of traditional and emerging techniques and fluids for electronics cooling", Renewable and Sustainable Energy Reviews, Vol. 78, pp. 821-833, 2017. https://doi.org/10.1016/j.rser.2017.04.112

[3] Pedram, M., Nazarian, S., "Thermal modeling, analysis, and management in VLSI circuits: Principles and methods", Proceedings of the IEEE, Vol. 94, No. 8, pp. 1487-1501, 2006. https://doi.org/10.1109/JPROC.2006.879797

[4] Wang, C. C., "A quick overview of compact air-cooled heat sinks applicable for electronic cooling—recent progress", Inventions, Vol. 2, No. 1, p. 5, 2017. https://doi.org/10.3390/inventions2010005

[5] Liang. G., Mudawar, I., "Review of spray cooling–Part 1: Single-phase and nucleate boiling regimes, and critical heat flux", International Journal of Heat and Mass Transfer, Vol. 115, pp. 1174-1205, 2017. https://doi.org/10.1016/j.ijheatmasstransfer.2017.06.029

[6] Kuncoro, I. W., Pambudi, N., Biddinika, M., Widiastuti, I., Hijriawan, M., Wibowo, K., "Immersion cooling as the next technology for data center cooling: A review", in Journal of Physics: Conference Series, 2019, Vol. 1402, No. 4, p. 044057: IOP Publishing. https://doi.org/10.1088/1742-6596/1402/4/044057

[7] Muhammad, A., Selvakumar, D., Wu, J., "Numerical investigation of laminar flow and heat transfer in a liquid metal cooled mini-channel heat sink", International Journal of Heat and Mass Transfer, Vol. 150, p. 119265, 2020. https://doi.org/10.1016/j.ijheatmasstransfer.2019.119265

[8] Mahian, O. et al., "Recent advances in modeling and simulation of nanofluid flows-Part I: Fundamentals and theory", Physics reports, Vol. 790, pp. 1-48, 2019. https://doi.org/10.1016/j.physrep.2018.11.004

[9] Kumar, S., Kumar, A., Kothiyal, A. D., Bisht, M. S., "A review of flow and heat transfer behaviour of nanofluids in micro channel heat sinks", Thermal Science and Engineering Progress, Vol. 8, pp. 477-493, 2018. https://doi.org/10.1016/j.tsep.2018.10.004

[10] Sheilhzadeh, G. A., Nazififard, Madahian, M., R., Kazemi, K., "Hydrodynamic-thermal Variations of a Nanofluid in a Tube Equipped with a Twisted Tape", Energy Engineering and Management, Vol 8, No. 4, pp. 86-99, 2023. https://doi.org/10.22052/8.4.86

[11] Zhai, Y., Xia, G., Liu, X., Li, Y., "Heat transfer enhancement of Al2O3-H2O nanofluids flowing through a micro heat sink with complex structure", International Communications in heat and Mass transfer, Vol. 66, pp. 158-166, 2015. https://doi.org/10.1016/j.icheatmasstransfer.2015.05.025

[12] Doakhan, E., Sheikhzadeh, G. A., "Improved nanofluid cooling of cylindrical lithium ion battery pack in charge/discharge operation using wavy/stair channels and copper sheaths",  Energy Engineering and Management, Vol 13, No. 1, pp. 102-121, 2023. https://doi.org/10.22052/jeem.2023.113608

[13] Babaei, M. R., Sheikhzadeh, G. A., Abbasian Arani, A. A., "Numerical study of thethermohydraulic and energy-saving performance of a graphene nanoplatelet-platinum hybrid nanofluid inside a manifold microchannel heat sink", Energy Engineering and Management, Vol. 12, No. 4, pp. 100-113, 2023. https://doi.org/10.22052/jeem.2023.113687

[14] Sajid, M. U., Ali, H. M., "Recent advances in application of nanofluids in heat transfer devices: a critical review", Renewable and Sustainable Energy Reviews, Vol. 103, pp. 556-592, 2019. https://doi.org/10.1016/j.rser.2018.12.057

[15]  Naranjani, B., Roohi, E., Ebrahimi, A., "Thermal and hydraulic performance analysis of a heat sink with corrugated channels and nanofluids", Journal of Thermal Analysis and Calorimetry, Vol. 146, pp. 2549-2560, 2021. https://doi.org/10.1007/s10973-020-10225-9

[16] Koo, J., Kleinstreuer, C., "A new thermal conductivity model for nanofluids", Journal of Nanoparticle research, Vol. 6, pp. 577-588, 2004. https://doi.org/10.1007/s11051-004-3170-5

[17] Zhang, Y., Yu, X., Feng, Q., Zhang, R., "Thermal performance study of integrated cold plate with power module", Applied Thermal Engineering, Vol. 29, No. 17-18, pp. 3568-3573, 2009. https://doi.org/10.1016/j.applthermaleng.2009.06.013

[18] Hung, T. C., Huang, Y. X., and Yan, W. M., "Thermal performance of porous microchannel heat sink: Effects of enlarging channel outlet", International Communications in Heat and Mass Transfer, Vol. 48, pp. 86-92, 2013. https://doi.org/10.1016/j.icheatmasstransfer.2013.08.001

[19] Ramos-Alvarado, B., Feng, B., Peterson, G., "Comparison and optimization of single-phase liquid cooling devices for the heat dissipation of high-power LED arrays", Applied Thermal Engineering, Vol. 59, No. 1-2, pp. 648-659, 2013. https://doi.org/10.1016/j.applthermaleng.2013.06.036

[20] Sabin, M., Piva, S., "Numerical analysis of a cold plate for FM radio power amplifiers", in Journal of Physics: Conference Series, 2014, Vol. 525, No. 1, p. 012003: IOP Publishing. https://doi.org/10.1088/1742-6596/525/1/012003

[21] Patil, M. S., Seo, J. H., Panchal, S., Jee, S. W., Lee, M. Y., "Investigation on thermal performance of water-cooled Li-ion pouch cell and pack at high discharge rate with U-turn type microchannel cold plate", International Journal of Heat and Mass Transfer, Vol. 155, p. 119728, 2020. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119728

[22] Zhang, F., He, Y., Lao, Y., Zhai, L., Liang, B., "Optimization design and numerical study on thermal performance of a novel diamond-type channel cold plate", International Journal of Thermal Sciences, Vol. 188, p. 108254, 2023.

[23] Latif, M. J., "Heat convection", NY: Springer, 2009.