سامانه مدیریت نشریات علمی دانشگاه کاشان

Zeinali, Atefeh, Allahresani, Ali, Nasseri, Mohammad Ali, Dehghani, Abdulhamid. (1403). The Suzuki-Miyaura Reaction of Phenylboronic Acid with Different Aryl Halides Catalyzed with Cu (II) Salen Complex@KCC-1 as a Recyclable Heterogeneous Catalyst. سامانه مدیریت نشریات علمی, 14(3), 893-904. doi: 10.22052/JNS.2024.03.018
Atefeh Zeinali; Ali Allahresani; Mohammad Ali Nasseri; Abdulhamid Dehghani. "The Suzuki-Miyaura Reaction of Phenylboronic Acid with Different Aryl Halides Catalyzed with Cu (II) Salen Complex@KCC-1 as a Recyclable Heterogeneous Catalyst". سامانه مدیریت نشریات علمی, 14, 3, 1403, 893-904. doi: 10.22052/JNS.2024.03.018
Zeinali, Atefeh, Allahresani, Ali, Nasseri, Mohammad Ali, Dehghani, Abdulhamid. (1403). 'The Suzuki-Miyaura Reaction of Phenylboronic Acid with Different Aryl Halides Catalyzed with Cu (II) Salen Complex@KCC-1 as a Recyclable Heterogeneous Catalyst', سامانه مدیریت نشریات علمی, 14(3), pp. 893-904. doi: 10.22052/JNS.2024.03.018
Zeinali, Atefeh, Allahresani, Ali, Nasseri, Mohammad Ali, Dehghani, Abdulhamid. The Suzuki-Miyaura Reaction of Phenylboronic Acid with Different Aryl Halides Catalyzed with Cu (II) Salen Complex@KCC-1 as a Recyclable Heterogeneous Catalyst. سامانه مدیریت نشریات علمی, 1403; 14(3): 893-904. doi: 10.22052/JNS.2024.03.018

The Suzuki-Miyaura Reaction of Phenylboronic Acid with Different Aryl Halides Catalyzed with Cu (II) Salen Complex@KCC-1 as a Recyclable Heterogeneous Catalyst

Journal of Nanostructures
مقاله 18، دوره 14، شماره 3، مهر 2024، صفحه 893-904    اصل مقاله (1.01 M)
نوع مقاله: Research Paper
شناسه دیجیتال (DOI): 10.22052/JNS.2024.03.018
نویسندگان
Atefeh Zeinali* 1؛ Ali Allahresani2؛ Mohammad Ali Nasseri2؛ Abdulhamid Dehghani1
1Department of Organic Chemistry, Faculty of Chemistry, University of Kashan, Kashan, I.R. Iran
2Department of Chemistry, Faculty of Science, University of Birjand, Birjand, Iran
چکیده
The carbon-carbon bond formation reactions have always been interesting for scientists because of their wide range of uses in organic chemistry. The Suzuki-Miyaura reaction is a famous reaction for the C-C bond formation. The Suzuki-Miyaura reaction is applied to synthesize a wide range of pharmaceutical and biological compounds. In this research, a Cu (II) Salen complex supported on KCC-1 (Cu (II) Salen complex@KCC-1) has been synthesized and characterized for the C-C bond formation reaction. The synthesized catalyst was determined to be an effective heterogeneous catalyst for the coupling reaction of Suzuki-Miyaura. The synthesized catalyst was characterized via XRD, FT-IR, TEM, and EDX, and the organic compound was identification with melting-point, FT-IR, and 1H NMR techniques. Cu (II) Salen @ KCC-1 complex can be separated and reused simply in the reaction mixture and reused several consecutive runs without significantly reducing the catalyst’s performance. To identify each product, FT-IR, 1H NMR, and melting point techniques were applied.
کلیدواژه‌ها
Aryl halide؛ Cu (II) Salen complex؛ KCC-1؛ Phenylboronic acid؛ Suzuki-Miyaura reaction
اصل مقاله

INTRODUCTION
Schiff base (as well known as azomethine or imine) is an exceptional ligands category using diverse donor atoms demonstrating interesting coordination to many metal ions [1,2]. In preparing their metal complexes the adaptability by Schiff base chelation including transition metal ions is utilized. Schiff’s base metal complex is famous because of their broad application, easy synthesis, and stability [3,4]. 
Metal complex comprising ligand based on Schiff-base have been investigated for their fascinating and significant features like their capability binding by oxygen, antibacterial, antifungal and photochromism attribute, complexind and hydrogenation ability to some poisonous metals, and catalytic activity in olefins [5,6].
Cross-coupling reaction using the transition metal catalysts is unquestionably widely used to form C-N [7], C-C [8], C-S [9], and C-O [10], bonds in the synthesis of organic compounds. Scientists are attempting to expand easy, rapid, inexpensive, and much more efficient methods for diverse coupling reactions [11]. The Suzuki–Miyaura reaction is among the utmost utilized cross-coupling reaction in contemporary organic synthesis, whereas in the presence of the catalyst, the biphenyl molecule is synthesized by coupling the reaction of an aryl halide or triflate with phenylboronic acid [12]. Complexes of palladium are typical catalysts in the Suzuki–Miyaura reaction [13–16]. 
Regardless of the prevalent catalytic applications, the complexes of palladium have restricting aspects like poisonousness and more expensive, which caused the restriction of those on industrial-scale applications [17]. As a workable alternative to palladium, lately, Cu-based catalyst has drawn very consideration because of their biocompatibility and reduced cost in addition to their catalytic capability in cross-coupling reaction [18–20]. Notwithstanding these benefits, just some Suzuki-Miyaura (SM) cross-coupling reactions including Cu-catalyzed has been reported. These copper-based catalysts are such as 3D MOF {[Cu (4-tba)2](solvent)}n [21], copper nano colloid [22], Pd-Cu@Carbon [23], and Cu@molecular sieve [24]. Therefore, in order to extend the Suzuki–Miyaura coupling reaction catalyzed by copper, the development of novel and effective copper-based nanocatalysts is required. Therefore, the usage of new materials as supports for the heterogeneous catalysts is necessary. The immobility of copper species onto solid-supports in heterogeneous catalysts facilitates separation, thereby decreasing pollution and reuse of costly catalysts. For the preparation of heterogeneous catalysts, a variety of solid support includes zeolite, polymers, carbon nanotubes, and silica has been used [25–32]. The nature of the support can affect the reactivity and selectivity of the catalyst, consequently, careful selection of support could lead to the development of novel heterogeneous catalyst. As a proposition, KCC-1 is a compound that can be used as a solid-support. Fibrous nano-silica (KCC-1), which attributes a high surface area and the effortless access via its fiber (as opposed to the traditional usage of pores), described by Polshettiwar et al. [33]. This would be a perfect catalyst support candidate for the manufacture of excellent metal-based catalysts that show high availability of active sites and superb catalytic activity. In this article, we synthesized copper (II) immobilized on Schiff base-functionalized KCC-1. In this procedure, in the beginning step, the KCC-1 was prepared and then Salen ligand was attached to the KCC-1 and ultimately, copper was coordinated to the Salen ligand and the corresponding catalyst was synthesized. In the next step, the efficiency of Cu (II) Salen complex@KCC-1 has been studied in Suzuki–Miyaura cross-coupling reaction (Fig. 1). Moreover, the amount of catalyst which has been used in the reaction and its effect on the product yields, as well as the ability to recovery have been studied. The other promising points of the presented methodology are inexpensive and readily available catalyst, operational simplicity,usage of environmentally benign solvents, high isolated yields of the pure products, mild reaction conditions, no formation of by-products, and finally, agreement with some of the green chemistry protocols.

MATERIALS AND METHODS
Using cetyltrimethylammonium bromide (CTAB), urea, tetraethyl orthosilicate (TEOS), and 1-panthenol, KCC-1 was synthesized. Then, salicylaldehyde and (3-Aminopropyl)trimethoxysilane (APTMS) was added drop by drop to obtain Salen ligand. In the next step, using Cu (II) acetate and NaOH, the homogenous copper was obtained. Lastly, the immobilizing of homogeneous Cu (II) Salen complex on the KCC-1 was done.
Fourier transform infrared (FT-IR), energy dispersive X-ray (EDX), powder X-ray diffractometric (XRD), BET & BJH, Transmission electron microscopy (TEM) were utilized to characterize the Cu (II) Salen complex loaded on KCC-1.

Preparation of the catalyst
Preparation of KCC-1
Dissolve 2 g of cetyltrimethylammonium bromide (CTAB) (5.48 mmol) and 2.4 g of urea (39.96 mmol) in 100 mL of water and stirred for 15 minutes. Then mix 10 mL of tetraethyl orthosilicate (TEOS) (44.78 mmol) with 10 mL of cyclohexane and drop by drop to the above solution and stirrer again for 15 minutes on a magnetic stirrer. Subsequently, 6 mL of 1-panthenol was added to it and this time it was placed on a magnetic stirrer at room temperature for 20 minutes. Then put the solution in the microwave for 1 hours at 120 oC and then dry at room temperature to form a precipitate. The corresponding precipitate is washed and separated by centrifugation and water and ethanol solvents and placed in an oven at 80 oC for 8 hours to dry [34].

Preparation of Salen ligand 
Mix 0.106 mL of salicylaldehyde (0.95 mmol) with 2 mL of ethanol Merck and transfer the mixture to a balloon and 0.218 mL of (3-Aminopropyl)trimethoxysilane (APTMS) (0.93 mmol) was added drop by drop to the balloon. The reaction mixture was then refluxed for 3 hours, after which the solvent was removed by rotary and the corresponding ligand was obtained [35].

Preparation of Cu (II) Salen complex
Then, to synthesize the Cu (II) Salen complex, add 20 mL of ethanol to the 1 mmol of the Salen ligand, and then 0.66 gr of NaOH (1.65 mmol) and 0.199 gr of copper (II) acetate (1.095 mmol) was added respectively and refluxed for 2 hours at 80 oC. After purification, the product was dried at 80 oC in a vacuum oven for 8 hours [36,37].

Preparation of Cu (II) Salen complex@KCC-1
Dissolve 0.5 g of KCC-1 in 50 mL of dry toluene and the mixture mentioned was sonicated for 30 min. Then, 0.25 g of Cu (II) Salen complex was added and the mixture was stirred under reflux for 48 hours. After purifying the precipitate, it was placed in a vacuum oven at 70 oC for 8 hours.

RESULTS AND DISCUSSION
 Using cetyltrimethylammonium bromide (CTAB), urea, tetraethyl orthosilicate (TEOS), and 1-panthenol, KCC-1 was synthesized. Then, salicylaldehyde and (3-Aminopropyl)trimethoxysilane (APTMS) was added drop by drop to obtain Salen ligand. In the next step, using Cu (II) acetate and NaOH, the homogenous copper was obtained. Lastly, the immobilizing of homogeneous Cu (II) Salen complex on the KCC-1 was done (Fig. 2).
Fourier transform infrared (FT-IR), energy dispersive X-ray (EDX), powder X-ray diffractometric (XRD), and Transmission electron microscopy (TEM) were utilized to characterize the Cu (II) Salen complex loaded on KCC-1.

FT-IR spectroscopy
The FT-IR was studied at 4000 to 400 cm−1 for KCC-1, ligand, Cu(II) Salen complex, and Cu(II) Salen complex@KCC-1 via FT-IR spectroscopy. The infrared spectra of all stages of Cu Salen complex @ KCC-1 synthesis are shown in the figure below (Fig. 3). In Fig. 3a spectrum shows the KCC-1 infrared spectrum, with vibrations in the 808, 915, and 3300 cm-1 regions, which are Si and OH, respectively. The above vibrations emphasize KCC-1 synthesis [38]. Spectrum 3b represents the infrared spectrum of Salen ligand that vibrations at about 1100, 1690, 3323 cm-1 correspond to Si, C=N, and OH respectively [39,40]. The 3c spectrum, the infrared spectrum of the Cu(II) Salen, shows that the stretching band vibrations in the region of 1115 and 2889 cm-1 are related to Si and methylene rings, respectively, and also the stretching band vibration of the C=N bond is observed in 1626 cm-1 [40]. The spectrum 3d represents the infrared spectrum of the heterogeneous catalyst (Cu (II) Salen complex @ KCC-1). The new band at 1585 cm-1 has appeared in the heterogeneous catalyst, which together with the 1099 cm-1 band related to Si-O-Si indicates the successful immobilization of the homogeneous Cu (II) Salen complex on the surface of KCC-1.

Transmission Electron Microscopy (TEM)
The TEM images of KCC-1 (a) and Cu (II) Salen complex@KCC-1 (b) are shown in Fig. 4. As the images show, the nanoparticles are spherical.

X-ray diffraction (XRD) analysis
Fig. 5 presents the XRD patterns of synthesized KCC-1 (a) Cu(II) Salen complex@KCC-1 (b) nanoparticles. In the Cu (II) Salen complex @ KCC-1 X-ray diffraction pattern, the peak intensity decrease relative to the KCC-1 X-ray diffraction pattern could indicate the presence of a Salen complex immobilized on KCC-1. Also, a decrease in peak intensity of 2θ = 22.13º can be evidence of Salen complex coating on a KCC-1 substrate [34-38].

Energy dispersive X-ray (EDX)
Fig. 6 shows the energy-dispersive X-ray spectroscopy (EDX) of Cu (II) Salen complex@ KCC-1 nanoparticle. The presence of the copper atom in nanoparticle was confirmed by EDX spectroscopy analysis. Peaks of C, O, Si elements are also clearly visible in this spectrum, which is a testament to the successful synthesis of this nanoparticle (Cu (II) Salen complex@KCC-1).

BET surface area
The N2 adsorption–desorption isotherm of Cu(II) Salen complex@KCC-1 revealed a characteristic type IV curve with a typical H3 hysteresis loop (Fig. 7). As for Cu(II) Salen complex@KCC-1, the BET surface area and average pore diameter are obtained as 698 m2 g−1 and 3.41 nm respectively.

General procedure for catalytic Suzuki–Miyaura coupling
To 1.2 mmol of phenylboronic acid, 1 mmol of aryl halide and 2 mmol of K2CO3, 2 mL of DMF as a solvent, and 0.07 g of Cu (II) Salen complex@KCC-1 were added and the resulting mixture was refluxed at 110 oC for a suitable time, the reaction progress was monitored by TLC. After the reaction was completed, the products were separated and purified, the best reaction efficiency was reported to be 95% after 4 hours. Structural assignments of the products are according to their 1HNMR spectra.

Analytical Data
1,1’-Biphenyl: White solid; M.P.= 68-70°C; FT-IR (KBr, cm-1): ῡ = 3044, 2971, 2835, 1889, 1611, 1483, 1251, 1193, 1114, 1029, 834, 754, 684; 1H NMR (250 MHz, CDCl3): δ(ppm) = 7.63 – 7.58 (m, 4H, Ar), 7.49 – 7.41 (m, 4H, Ar), 7.39 – 7.32 (m, 2H, Ar).
3-Nitro-1,1’-biphenyl: Yellow solid; M.P.= 58-59°C; FT-IR (KBr, cm-1): ῡ = 3081, 2923, 1626, 1568, 1352, 1065, 852, 749; 1H NMR (300 MHz, DMSO): δ(ppm) = 8.42 (t, J = 2.0 Hz, 1H, Ar), 8.24-8.13 (m, 2H, Ar), 7.79-7.74 (m, 3H, Ar), 7.57 – 7.44 (m, 3H, Ar).
4-Bromo-1,1’-biphenyl: White solid; M.P.= 87-90°C; FT-IR (KBr, cm-1): ῡ = 3051, 1949, 1907, 1753, 1658, 1471, 1389, 1069, 996, 823, 751, 684; 1H NMR (250 MHz, CDCl3): δ(ppm) = 7.59 – 7.54 (m, 4H, Ar), 7.48 – 7.34 (m, 5H, Ar).
4-Methyl-1,1’-biphenyl: White to yellow solid; M.P.= 44-47°C; FT-IR (KBr, cm-1): ῡ = 3029, 2941, 1594, 1483, 1431, 1406, 1169, 1117, 1032, 911, 823, 753, 691; 1H NMR (250 MHz, CDCl3): δ(ppm) = 7.50 – 7.43 (m, 3H, Ar), 7.41 – 7.29 (m, 4H, Ar), 7.28 – 7.17 (m, 2H, Ar), 2.28 (s, 3H, CH3).
2-Methyl-1,1’-biphenyl: Colorless liquid; FT-IR (KBr, cm-1): ῡ = 3674, 3523, 3441, 2922, 2855, 1733, 1452, 1262, 1095, 803; 1H NMR (250 MHz, CDCl3): δ (ppm) = 7.34 – 7.21 (m, 5H, Ar), 7.17-7.13 (m, 4H, Ar), 2.18 (s, 3H, CH3).
4-Methoxy-1,1’-biphenyl: White solid; M.P.= 87-89°C; FT-IR (KBr, cm-1): ῡ = 3041, 2958, 2833, 18979, 1601, 1483, 1244, 1196, 1121, 1034, 832, 754, 683; 1H NMR (250 MHz, CDCl3): δ(ppm) = 7.63 – 7.56 (m, 4H, Ar), 7.50 – 7.44 (m, 2H, Ar), 7.40 – 7.32 (m, 1H, Ar), 7.06 – 7.00 (m, 2H, Ar), 3.88 (s, 3H, OCH3).
1,1’-Biphenyl-4-carbonitril: White solid; M.P.= 85-88°C; FT-IR (KBr, cm-1): ῡ = 842, 761, 723, 695; 1H NMR (250 MHz, CDCl3): δ(ppm) = 7.76 – 7.66 (m, 4H), 7.62 – 7.57 (m, 2H), 7.53 – 7.39 (m, 3H).
4-Acetylbiphenyl: White solid; M.P.= 119-121°C; FT-IR (KBr, cm-1): ῡ = 3053, 3029, 2991, 2913, 1681, 1613, 1421, 1401, 1352, 1261, 1125, 1074, 961, 833, 764, 721, 694; 1H NMR (250 MHz, CDCl3): δ(ppm) = 8.07 – 8.02 (m, 2H, Ar), 7.72 – 7.62 (m, 4H, Ar), 7.52 – 7.38 (m, 3H, Ar), 2.65 (s, 3H, CH3).
4-ethyl-1,1’-biphenyl: White solid; M.P.= 33-35°C; FT-IR (KBr, cm-1): ῡ = 3033, 2961, 2931, 1484, 1451, 1407, 833, 751, 692; 1H NMR (300 MHz, CDCl3): δ(ppm)= 7.69 – 7.60 (m, 4H, Ar), 7.54 – 7.49 (m, 2H, Ar), 7.45 – 7.36 (m, 3H, Ar), 2.79 (q, J = 7.6 Hz, 2H, CH2), 1.37 (t, J = 7.6 Hz, 3H, CH3).
4-Phenylbiphenyl: White solid; M.P.= 214-15°C; FT-IR (KBr, cm-1): ῡ = 3038, 2975, 2833, 1891, 1617, 1488, 1255, 1198, 1117, 1032, 831, 753, 679; 1H NMR (250 MHz, CDCl3): δ(ppm) = 7.70 – 7.62 (m, 8H, Ar), 7.50-7.43 (m, 4H, Ar), 7.39 – 7.31 (m, 2H, Ar).
4-ethyl-4’-methoxy-1,1’-biphenyl: White solid; M.P.= 73-74°C; FT-IR (KBr, cm-1): ῡ =3109, 2968, 2921, 2841, 1895, 1611, 1492, 1453, 1252, 1179, 1133, 1032, 816, 653; 1H NMR (250 MHz, CDCl3): δ(ppm) = 7.54 – 7.45 (m, 4H, Ar), 7.27-7.24 (m, 2H, Ar), 7.00-6.94 (m, 2H, Ar), 3.85 (s, 3H, OMe), 2.72 – 2.64 (m, 2H, CH2), 1.31 – 1.23 (m, 3H, CH3).
4-ethyl-4’-nitro-1,1’-biphenyl: White solid; M.P.= 82-84°C; FT-IR (thin film, cm-1): ῡ =3081, 2983, 2852, 1575, 1513, 1442, 1341, 1315, 1109, 854, 834, 751; 1H NMR (250 MHz, CDCl3): δ(ppm) = 8.31-8.26 (m, 2H, Ar), 7.75-7.54 (m, 4H, Ar), 7.35-7.31 (m, 2H, Ar), 2.77 – 2.68 (m, 2H, CH2), 1.32-1.25 (m, 3H, CH3).
[1,1’-biphenyl]-4-amine: Pale yellow solid; M.P.= 52-54°C; FT-IR (KBr, cm-1): ῡ = 3421, 3209, 2924, 1623, 1481, 1261, 831; 1H NMR (300 MHz, DMSO): δ(ppm) = 7.55 (d, J = 8.1 Hz, 2H, Ar), 7.41 – 7.36 (m, 4H, Ar), 7.22 (t, J = 6.7 Hz, 1H, Ar), 6.67 (d, J = 8.6 Hz, 2H, Ar), 5.25 (s, 2H, NH2).
[1,1’-Biphenyl]-2-amine: Pale yellow solid; M.P.= 53-55°C; FT-IR (neat, cm-1):  ῡ = 3474, 3378, 3020, 1609, 1478, 1433, 1286, 1286, 1147, 1061, 1002, 920, 753; 1H NMR (300 MHz, DMSO): δ(ppm) = 7.47 – 7.35 (m, 5H, Ar), 7.10 – 7.01 (m, 2H, Ar), 6.82 – 6.65 (m, 2H, Ar), 4.79 (s, 2H, NH2).

The catalyst performance of the Cu (II) Salen complex@KCC-1 in the cross-coupling reaction of Suzuki-Miyaura
The catalytic properties of Cu (II) Salen complex@KCC-1 was investigated to form a carbon-carbon bond through Suzuki-Miyaura (SM) cross-coupling of phenylboronic acid (PBA) with aryl halide as the model reaction. The important reaction parameters, such as solvent, base, the catalyst amount, and temperature, were compared to attain the optimal conditions. 
A variety of solvents with different properties and polarity were tested (Table 1, entries 1-7). DMF had the best effect by providing 95% efficiency at 110 oC (Table 1, entry 1), and after that, DMSO yielded an efficiency of 92%.
The results of Table 2 demonstrate that the basic medium is likewise important for the Suzuki-Miyaura (SM) cross-coupling reaction (Table 2, entry 8). Accordingly, to study its effect, many organic and inorganic bases were examined from the Suzuki-Miyaura (SM) cross-coupling reaction of phenylboronic acid (1.2 mmol) and iodobenzene (1 mmol) using all the Cu(II) Salen complex@KCC-1 (0.07 g) in DMF (2 mL) at 110 oC.
The ordinary organic bases like Et3N usually utilized for the Suzuki-Miyaura reaction (SMR) have proven that in the corresponding reaction, it showed less efficiency (Table 2, entry 6). The identical treatment was also detected using sodium bicarbonate foundation (Table 2, entry 3) and hydroxide ion (Table 2, entries 1,2) because in both cases reactions need more time (7 and 8 hours, respectively). By comparison, carbonate base, i.e., K2CO3 and Na2CO3, given excellent results (Table 2, entries 4,7). Therefore, we’ve chosen K2CO3 as the ideal base for more optimization.
The reaction was performed when different amounts of heterogeneous Cu (II) Salen complex@KCC-1 were present at 110 oC. Using 0.07 g of Cu (II) Salen complex@KCC-1, the maximum performance for the relevant product in a brief time was got. Efficiency declined at lower values and at higher value (0.09 g) no negative or positive effects on efficiency were observed (Table 3, entry 1). To compare the homogeneous Salen Cu was also studied under the obtained optimum circumstances (Table 3, entry 6).
To elucidate the particular catalyst performance of Cu (II) Salen complex@KCC-1 in the Suzuki-Miyaura cross-coupling reaction (SMR), the reaction under the obtained optimized conditions was carried out in the absence of the catalyst. When the heterogeneous catalyst is not present, we do not see any product (Table 3, entry 5).
On the other hand, temperature represents an important role in the performance of the reaction. Different temperatures (25, 50, 80, 100, and 110 oC) on the model reaction was performed in dimethylformamide as a solvent and K2CO3 in the presence of Cu (II) Salen complex@KCC-1. There was a significant reduction in performance at 25 oC (Table 4, entry 1). The reaction proceeds more rapidly at 50 oC than at 25 oC. Nevertheless, at temperatures above 50 oC (80, 100, and 110 oC), a clear increase in the performance of the corresponding reaction (Table 4, entries 3-5) was observed. We decided that the best temperature is 110 oC.
Various structurally different aryl iodide, bromide, and chloride react via phenylboronic acid (PBA) were converted to the corresponding products by the catalyst under obtained optimized conditions. The results are summarized in Table 5, where good to excellent yields are observed for aryl bromides (ArBr) and aryl iodides (ArI).  
The model reaction of the Suzuki-Miyaura has been performed by using 0.07 g Cu (II) Salen complex@KCC-1 in the reaction of iodobenzene, phenylboronic acid, and K2CO3 in 110°C via DMF as a solvent to observe reusability of the catalyst. Based on the tests, the outcomes which are shown in (Fig. 8) demonstrate that after four cycles, there is no particular reduction in the yield.
To comprehend the particularities of Cu (II) Salen complex@KCC-1, we compare the outcomes of the Suzuki-Miyaura (SM) reaction with other heterogeneous catalysts as presented in Table 6. This table demonstrates that the KCC-1 @ Salen Cu shows improved activity for the Suzuki-Miyaura reaction.
 
CONCLUSION
A novel, cost-effective, general and efficient method has been developed for transformation of various aryl halides (ArX) and phenylboronic acid (PBA) to the relevant product with a recyclable Cu (II) Salen complex@KCC-1. The characteristics of the catalyst was studied via several analyses including TEM, FTIR, BET&BJH, EDX, and XRD. The catalyst was highly effective in performing the Suzuki-Miyaura (SM) reaction with a variety of different electronic substrates. Also, tests of catalyst proved that Cu (II) Salen complex@KCC-1 is the most active in DMF at 110 oC via K2CO3 for the Suzuki-Miyaura (SM) reaction. Besides, the heterogeneous catalyst determined good recoverability and could be recycled for five consecutive cycles without any remarkable reactivity loss. The other promising points of the presented methodology are inexpensive and readily available catalyst, operational simplicity, usage of environmentally benign solvents, high isolated yields of the pure products, mild reaction conditions, no formation of by-products, and finally, agreement with some of the green chemistry protocols.

ACKNOWLEDGEMENTS
The authors are grateful to the University of Birjand for financial support.

CONFLICT OF INTEREST
The authors declare that there is no conflict of interests regarding the publication of this manuscript.

مراجع

1.    Gupta KC, Sutar AK. Catalytic activities of Schiff base transition metal complexes. Coord Chem Rev. 2008;252(12-14):1420-1450.
2.    Dhanaraj CJ, Johnson J, Joseph J, Joseyphus RS. Quinoxaline-based Schiff base transition metal complexes: review. J Coord Chem. 2013;66(8):1416-1450.
3.    Alias M, Kassum H, Shakir C. Synthesis, physical characterization and biological evaluation of Schiff base M(II) complexes. Journal of the Association of Arab Universities for Basic and Applied Sciences. 2014;15(1):28-34.
4.    Abu-Dief AM, Mohamed IMA. A review on versatile applications of transition metal complexes incorporating Schiff bases. Beni-Suef University Journal of Basic and Applied Sciences. 2015;4(2):119-133.
5.    Raman N, Johnson Raja S, Joseph J, Dhaveethu Raja J. Synthesis, spectral characterization and dna cleavage study of heterocyclic schiff base metal complexes. Journal of the Chilean Chemical Society. 2007;52(2).
6.    Malik S, Ghosh S, Mitu L. Complexes of some 3d-metals with a Schiff base derived from 5-acetamido-1,3,4-thiadiazole-2-sulphonamide and their biological activity. J Serb Chem Soc. 2011;76(10):1387-1394.
7.    Wang Q, Su Y, Li L, Huang H. Transition-metal catalysed C–N bond activation. Chemical Society Reviews. 2016;45(5):1257-1272.
8.    Anitha P, Manikandan R, Vijayan P, Prakash G, Viswanathamurthi P, Butcher RJ. Nickel(II) complexes containing ONS donor ligands: Synthesis, characterization, crystal structure and catalytic application towards C-C cross-coupling reactions. Journal of Chemical Sciences. 2015;127(4):597-608.
9.    Guan P, Cao C, Liu Y, Li Y, He P, Chen Q, et al. Efficient nickel/N-heterocyclic carbene catalyzed C–S cross-coupling. Tetrahedron Lett. 2012;53(45):5987-5992.
10.    Guo P. Gold-catalyzed formation of C–O and C–C bonds: An efficient domino reaction synthesis of functionalized furans. Catal Commun. 2015;68:58-60.
11.    Jin MJ, Lee DH. A Practical Heterogeneous Catalyst for the Suzuki, Sonogashira, and Stille Coupling Reactions of Unreactive Aryl Chlorides. Angew Chem Int Ed. 2010;49(6):1119-1122.
12.    Das P, Linert W. Schiff base-derived homogeneous and heterogeneous palladium catalysts for the Suzuki–Miyaura reaction. Coord Chem Rev. 2016;311:1-23.
13.    Siddiqui MM, Waheed M, Bhat SA, Balakrishna MS. Application of quinoxaline based diimidazolium salt in palladium catalyzed cross-coupling reactions. Journal of Chemical Sciences. 2015;127(5):879-884.
14.    Punji B, Ganesamoorthy C, Balakrishna MS. Suzuki cross-coupling reactions catalyzed by palladium complex of an inexpensive phosphinite, 2-diphenylphosphinoxynaphthyl. J Mol Catal A: Chem. 2006;259(1-2):78-83.
15.    Hosseini-Sarvari M, Dehghani A. Nickel/TiO2-catalyzed Suzuki–Miyaura cross-coupling of arylboronic acids with aryl halides in MeOH/H2O. Monatshefte für Chemie - Chemical Monthly. 2023;154(3-4):397-405.
16.    Roymahapatra G, Samanta T, Seth SK, Mahapatra A, Chattopadhyay SK, Dinda J. N, N′-Olefin functionalized Bis-Imidazolium Pd(II) chloride N-Heterocyclic carbene complex builds a supramolecular framework and shows catalytic efficacy for ‘C–C’ coupling reactions. Journal of Chemical Sciences. 2015;127(6):1057-1065.
17.    Mao J, Guo J, Fang F, Ji S-J. Highly efficient copper(0)-catalyzed Suzuki–Miyaura cross-coupling reactions in reusable PEG-400. Tetrahedron. 2008;64(18):3905-3911.
18.    Gigant N, Gillaizeau I. Palladium(II)-Catalyzed Direct Alkenylation of Nonaromatic Enamides. Org Lett. 2012;14(13):3304-3307.
19.    Liu Y, Li D, Park CM. Stereoselective Synthesis of Highly Substituted Enamides by an Oxidative Heck Reaction. Angew Chem. 2011;123(32):7471-7474.
20.    Calò V, Nacci A, Monopoli A, Ieva E, Cioffi N. Copper Bronze Catalyzed Heck Reaction in Ionic Liquids. Org Lett. 2005;7(4):617-620.
21.    Wang B, Yang P, Ge Z-W, Li C-P. A porous metal–organic framework as active catalyst for multiple C–N/C–C bond formation reactions. Inorg Chem Commun. 2015;61:13-15.
22.    Thathagar MB, Beckers J, Rothenberg G. Copper-Catalyzed Suzuki Cross-Coupling Using Mixed Nanocluster Catalysts. Journal of the American Chemical Society. 2002;124(40):11858-11859.
23.    Kim S-J, Oh S-D, Lee S, Choi S-H. Radiolytic synthesis of Pd-M (M=Ag, Ni, and Cu)/C catalyst and their use in Suzuki-type and Heck-type reaction. Journal of Industrial and Engineering Chemistry. 2008;14(4):449-456.
24.    Fodor A, Hell Z, Pirault-Roy L. Copper(II)- and palladium(II)-modified molecular sieve, a reusable catalyst for the Suzuki–Miyaura-coupling. Applied Catalysis A: General. 2014;484:39-50.
25.    Pan X, Fan Z, Chen W, Ding Y, Luo H, Bao X. Enhanced ethanol production inside carbon-nanotube reactors containing catalytic particles. Nature Materials. 2007;6(7):507-511.
26.    Bai L, Wang JX. Reusable, Polymer‐Supported, Palladium‐Catalyzed, Atom‐ Efficient Coupling Reaction of Aryl Halides with Sodium Tetraphenylborate in Water by Focused Microwave Irradiation. Advanced Synthesis & Catalysis. 2008;350(2):315-320.
27.    Castillejos E, Debouttière PJ, Roiban L, Solhy A, Martinez V, Kihn Y, et al. An Efficient Strategy to Drive Nanoparticles into Carbon Nanotubes and the Remarkable Effect of Confinement on Their Catalytic Performance. Angew Chem Int Ed. 2009;48(14):2529-2533.
28.    Wu C-D, Hu A, Zhang L, Lin W. A Homochiral Porous Metal−Organic Framework for Highly Enantioselective Heterogeneous Asymmetric Catalysis. Journal of the American Chemical Society. 2005;127(25):8940-8941.
29.    Mandal S, Roy D, Chaudhari RV, Sastry M. Pt and Pd Nanoparticles Immobilized on Amine-Functionalized Zeolite: Excellent Catalysts for Hydrogenation and Heck Reactions. Chem Mater. 2004;16(19):3714-3724.
30.    Zhang R, Ding W, Tu B, Zhao D. Mesoporous Silica:  An Efficient Nanoreactor for Liquid−Liquid Biphase Reactions. Chem Mater. 2007;19(18):4379-4381.
31.    Rostamnia S, Xin H. Pd(OAc)2@SBA‐15/PrEn nanoreactor: a highly active, reusable and selective phosphine‐free catalyst for Suzuki–Miyauracross‐coupling reaction in aqueous media. Appl Organomet Chem. 2013;27(6):348-352.
32.    Karimi B, Fadavi Akhavan P. A novel water-soluble NHC-Pd polymer: an efficient and recyclable catalyst for the Suzuki coupling of aryl chlorides in water at room temperature. Chemical Communications. 2011;47(27):7686.
33.    Polshettiwar V, Cha D, Zhang X, Basset JM. Cover Picture: High‐Surface‐Area Silica Nanospheres (KCC‐1) with a Fibrous Morphology (Angew. Chem. Int. Ed. 50/2010). Angew Chem Int Ed. 2010;49(50):9539-9539.
34.    Sadeghzadeh SM, Zhiani R, Khoobi M, Emrani S. Synthesis of 3-Acyloxylindolines under mild conditions using tripolyphosphate-grafted KCC-1-NH2. Microporous Mesoporous Mater. 2018;257:147-153.
35.    Rashid Z, Ghahremanzadeh R, Nejadmoghaddam M-R, Nazari M, Shokri M-R, Naeimi H, et al. Nickel-Salen supported paramagnetic nanoparticles for 6-His-target recombinant protein affinity purification. Journal of Chromatography A. 2017;1490:47-53.
36.    Hemmat K, Nasseri MA, Allahresani A. CoFe2O4@SiO2<@Co(III) Salen Complex: A Magnetically Recyclable Heterogeneous Catalyst for the Synthesis of Quinoline Derivatives in Water. ChemistrySelect. 2019;4(14):4339-4346.
37.    Nasseri MA, Hemmat K, Allahresani A. Synthesis and characterization of Co (III) salen complex immobilized on cobalt ferrite‐silica nanoparticle and their application in the synthesis of spirooxindoles. Appl Organomet Chem. 2019;33(5).
38.    Sadeghzadeh SM, Zhiani R, Emrani S. Pd/APTPOSS@KCC-1 as a new and efficient support catalyst for C–H activation. RSC Advances. 2017;7(40):24885-24894.
39.    Nasseri MA, Hemmat K, Allahresani A, Hamidi‐Hajiabadi E. CoFe2O4@SiO2@ Co (III) salen complex nanoparticle as a green and efficient magnetic nanocatalyst for the oxidation of benzyl alcohols by molecular O2. Appl Organomet Chem. 2019;33(6).
40.    Singh G, Kumar M, Sharma K, Bhalla V. A supramolecular ensemble of a PBI derivative and Cu2O NPs: potential photocatalysts for the Suzuki and Suzuki type coupling reactions. Green Chem. 2016;18(11):3278-3285.
41.    Stradiotto M, Sawatzky R. (DPEPhos)Ni(mesityl)Br: An Air-Stable Pre-Catalyst for Challenging Suzuki–Miyaura Cross-Couplings Leading to Unsymmetrical Biheteroaryls. Synlett. 2018;29(06):799-804.
42.    Sarkar SM, Rahman ML, Yusoff MM. Pyridinyl functionalized MCM-48 supported highly active heterogeneous palladium catalyst for cross-coupling reactions. RSC Advances. 2015;5(25):19630-19637.
43.    Han P, Wang X, Qiu X, Ji X, Gao L. One-step synthesis of palladium/SBA-15 nanocomposites and its catalytic application. J Mol Catal A: Chem. 2007;272(1-2):136-141.
44.    Ghorbani-Choghamarani A, Derakhshan AA, Hajjami M, Rajabi L. Copper–Schiff base alumoxane: a new and reusable mesoporous nano catalyst for Suzuki–Miyaura and Stille C–C cross-coupling reactions. RSC Advances. 2016;6(97):94314-94324.

آمار
تعداد مشاهده مقاله: 2,657
تعداد دریافت فایل اصل مقاله: 503