[1] Kannan, N., Vakeesan, D.,"Solar energy for future world: - A review", Renewable and Sustainable Energy Reviews, Vol. 62, pp. 1092-1105, 2016, https://doi.org/10.1016/j.rser.2016.05.022.

[2] Moya, D., Aldás, C., Kaparaju, P., "Geothermal energy: Power plant technology and direct heat applications", Renewable and Sustainable Energy Reviews, Vol. 94, pp. 889-901, 2018, https://doi.org/10.1016/j.rser.2018.06.047.

[3] Zheng, N., Liu, P., Wang, X., Shan, F., Liu, Wei Liu, Z., "Numerical simulation and optimization of heat transfer enhancement in a heat exchanger tube fitted with vortex rod inserts", Applied Thermal Engineering, Vol. 123, pp. 471-484, 2017, https://doi.org/10.1016/j.applthermaleng.2017.05.112.

[4] Bisoniya, T.S., Kumar, A., Baredar, P., "Experimental and analytical studies of earth–air heat exchanger (EAHE) systems in India: A review", Renewable and Sustainable Energy Reviews, Vol. 19, pp. 238-246, 2013.

[5] Rodrigues, M.K., Silva Brum, R.D., Vaz, J., Oliveira Rocha, L.A., Domingues dos Santos, E., André Isoldi, L.,"Numerical investigation about the improvement of the thermal potential of an Earth-Air Heat Exchanger (EAHE) employing the Constructal Design method", Renewable Energy, Vol. 80, pp. 538-551, 2015.

[6] Maakoul, A.E., Metoui, M.E., Abdellah, A.B., Saadeddine, S., Meziane, M., "Numerical investigation of thermohydraulic performance of air to water double-pipe heat exchanger with helical fins", Applied Thermal Engineering, Vol. 127, pp. 127-139, 2017, https://doi.org/10.1016/j.applthermaleng.2017.08.024.

[7] ChiehHuang, W., Chen, C.A., Shen, C., San, J.Y., "Effects of characteristic parameters on heat transfer enhancement of repeated ring-type ribs in circular tubes", Experimental Thermal and Fluid Science, Vol. 68, pp. 371-380, 2015, https://doi.org/10.1016/j.expthermflusci.2015.06.007.

[8] Xie, W.A., Xi, G.N., "Geometry effect on flow fluctuation and heat transfer in unsteady forced convection over backward and forward-facing steps", Energy, Vol. 132, pp. 49-56, 2017, https://doi.org/10.1016/j.energy.2017.05.072.

[9] Aghaei, A., Bhattacharyya, S., Dezfulizadeh, A., Goldanlou, A.S., Rostami, S., Sharifpur, M., "Heat transfer and fluid flow analysis using nanofluids in diamond-shaped cavities with novel obstacles, Engineering Applications of Computational Fluid Mechanics", Vol. 15, pp. 1034-1056 , 2020, https://doi.org/10.1080/19942060.2021.1930170.

[10] Saysroy, A., Eiamsa-ard, S., "Periodically fully-developed heat and fluid flow behaviors in a turbulent tube flow with square-cut twisted tape inserts", Applied Thermal Engineering, Vol. 112, pp. 895-910, 2017, https://doi.org/10.1016/j.applthermaleng.2016.10.154.

[11] Amanowicz, E., Wojtkowiak, J., "Validation of CFD model for simulation of multi-pipe earth-to-air heat exchangers (EAHEs) flow performance", Thermal Science and Engineering Progress, Vol. 5, No. 12, pp. 44-49, 2018.

[12] Zhou, T., Xiao, Y., Liu, Y., Lin, J., Huang, H., "Research on cooling performance of phase change material-filled earth-air heat exchanger", Energy Conversion and Management, Vol. 177, pp. 210-223, 2018.

[13] Hosseini, M., Ganji, D.D., AghajaniDelavar, M., "Experimental and numerical evaluation of different vortex generators on heat transfer", Applied Thermal Engineering, Vol. 108, pp. 905-915, 2016, https://doi.org/10.1016/j.applthermaleng.2016.07.174.

[14] Li, H., Ni, L., Liu, G., Yao, Y., "Performance evaluation of Earth to Air Heat Exchange (EAHE) used for indoor ventilation during winter in severe cold regions", Applied Thermal Engineering, Vol. 160, pp. 114111, 2019.

[15] Dezfulizadeh, A., Aghaei, A., HassaniJoshaghani, A. Najafizadeh, M.M., "Exergy efficiency of a novel heat exchanger under MHD effects filled with water-based Cu–SiO2-MWCNT ternary hybrid nanofluid based on empirical data", Journal of Thermal Analysis and Calorimetry, Vol. 147, pp. 4781-4804, 2022, https://doi.org/10.1007/s10973-021-10867-3

[16] Abdollahi, A., Shams, M.,"Optimization of shape and angle of attack of winglet vortex generator in a rectangular channel for heat transfer enhancement", Applied Thermal Engineering, Vol. 81, No. 25, pp. 376-387, 2015, https://doi.org/10.1016/j.applthermaleng.2015.01.044.

[17] Hong, Y., Du, J., Wang, S.,"Turbulent thermal, fluid flow and thermodynamic characteristics in a plain tube fitted with overlapped multiple twisted tapes", International Journal of Heat and Mass Transfer, Vol. 115, pp. 551-565, 2017, https://doi.org/10.1016/j.ijheatmasstransfer.2017.08.017.

[18] Li, H., Ni, L., Yao, Y., Sun, C., "Experimental investigation on the cooling performance of an Earth to Air Heat Exchanger (EAHE) equipped with an irrigation system to adjust soil moisture", Energy and Buildings, Vol. 196, pp. 280-292, 2019.

[19] Yang, D., Shi, R., Wei, H., Du, J., Wang, J., "Investigation of the performance of a cylindrical PCM-to-air heat exchanger (PAHE) for free ventilation cooling in fluctuating ambient environments, Sustainable Cities and Society",Vol. 51, pp. 101764, 2019.

[20] Aghaei, A.,Enayati, M.,Beigi, N., Ahmadi, A., Pourmohamadian, H.,Sadeghi, Sh.,Dezfulizadeh, A., Golzar, A., "Comparison of the effect of using helical strips and fines on the efficiency and thermal–hydraulic performance of parabolic solar collectors", Sustainable Energy Technologies and Assessments, Vol. 52, pp. 102254, 2022, https://doi.org/10.1016/j.seta.2022.102254.

[21] Promthaisong, P., Boonloi, A., Jedsadaratanachai, W.,"Numerical investigation on turbulent forced convection and heat transfer characteristic in spirally semicircle-grooved tube", International Journal of Mechanical and Materials Engineering, Vol. 11, pp. 9 2016, https://doi.org/10.1186/s40712-016-0062-2.

[22] Sabzipor, A. A.,Tabari, H., Aeini, A., "Estimation of daily average soil temperature in several climatic samples of Iran using meteorological data", Vol. 52, pp. 125-137, 2010.

[23] Rosa, N., Soares, N., Costa, J.J., Santos, P., Gervásio, H., "Assessment of an earth-air heat exchanger (EAHE) system for residential buildings in warm-summer Mediterranean climate", Sustainable Energy Technologies and Assessments, Vol. 38, pp. 100649, 2020.

[24] Dezfulizadeh, A., Aghaei, A., HassaniJoshaghani, A., Najafizadeh, M.M., "An experimental study on dynamic viscosity and thermal conductivity of water-Cu-SiO2-MWCNT ternary hybrid nanofluid and the development of practical correlations", Powder Technology, Vol. 389, pp. 215-234, 2021, https://doi.org/10.1016/j.powtec.2021.05.029.

[25] NejatiBarzoki, F., Sheikhzadeh, G.A., KhoshvaghtAliabadi, M., AbbasianArani, A.A., "Assessment of vortex generator shapes for enhancing thermohydraulic performance of fluid flow in a channel equipped with perforated chevron plate-fin", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 31, pp. 1790-1815. 2021, https://doi.org/10.1108/HFF-02-2020-0087.

[26] Zheng, Y., Yaghoubi, S., Dezfulizadeh, A. et al. "Free convection/radiation and entropy generation analyses for nanofluid of inclined square enclosure with uniform magnetic field", JTherm Anal Calorim, Vol. 141, No. 7, pp. 635–648, 2020, https://doi.org/10.1007/s10973-020-09497-y.

[27] Mir, S., Akbari, O.A., Toghraie, D., Sheikhzadeh, G.A., Marzban, A., Talebizadehsardari, P., "A comprehensive study of two-phase flow and heat transfer of water/Ag nanofluid in an elliptical curved minichannel", Chinese Journal of Chemical Engineering, Vol. 28, pp. 383-402, 2020, https://doi.org/10.1016/j.cjche.2019.07.007.

[28] Sheikhzadeh, G.A., Barzoki, F.N., Arani, A.A.A. et al. "Wings shape effect on behavior of hybrid nanofluid inside a channel having vortex generator", Heat Mass Transfer, Vol. 55, pp. 1969–1983, 2019, https://doi.org/10.1007/s00231-018-2489-x.

[29] Mousavi, S.M., Akbari, O.A., Sheikhzadeh, G., Marzban, A., Toghraie, D. and Chamkha, A.J. "Two-phase modeling of nanofluid forced convection in different arrangements of elliptical tube banks", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 30, pp. 1937-1966,2020 https://doi.org/10.1108/HFF-10-2018-0599.

[30] Aghaei A, Dezfulizadeh A, Fadaeidehar A, Sepehrirad M, Mazaheri H., "Determination of Energy Efficiency and Exergy of Solar Collector Bed, Operating Plate under Turbulent Nanoscale Flow with Molybdenum Disulfide Nanoparticles in Different Morphologies for Tropical Regions of Iran", JEM; Vol. 12, No. 1, pp. 130-143, 2022, https://doi.org/10.22052/12.1.130.

[31] Al-Ajmi, F., Loveday, D.L., Hanby, V.I., "The cooling potential of earth–air heat exchangers for domestic buildings in a desert climate", Building and Environment, Vol. 41, pp. 235-244, 2006, https://doi.org/10.1016/j.buildenv.2005.01.027.

[32] BenamarBouhacina, RachidSaim, HakanF.Oztop, "Numerical investigation of a novel tube design for the geothermal borehole heat exchanger", Applied Thermal Engineering, Vol. 79, No. 11, pp. 153-162, 2015, https://doi.org/10.1016/j.applthermaleng.2015.01.027.

[33] Akyürek, E, F., Geliş, K., Şahin, B., Manay, E., "Experimental analysis for heat transfer of nanofluid with wire coil turbulators in a concentric tube heat exchanger", Results in Physics, Vol. 9, pp. 376-389, 2018, https://doi.org/10.1016/j.rinp.2018.02.067.