[1] Sun, H., Moghaddam A. F., Sergeant, P., and den Bossche, A. V., "A Novel Driving Method for Switched Reluctance Motor With Standard Full Bridge Inverter", IEEE Transactions on Energy Conversion, Vol. 35, No. 2, pp. 994-1003, Ju. 2020, doi:10.1109/TEC.2020.2968758.

[2] Feyzi, M. R., Mousavi-Aghdam, S. R., and Ebrahimi, Y., "A comprehensive review on the performance improvement in switched reluctance motor design", In 24th Canadian Conference on Electrical and Computer Engineering (CCECE), May 2011, On, Canada, pp. 348-353, doi:10.1109/CCECE.2011.6030471.

[3] Krishnan, R., "witched reluctance motor drives: modeling, simulation, analysis, design, and applications," CRC press, 2017.

[4] MillerT. J. E., "Switched reluctance motors and their control", Magna physics publishing and Clarendon press, 1993.

[5] LukicS. M., and Emado, A., "Modeling of electric machines for automotive applications using efficiency maps", In Electrical insulation conference and electrical manufacturing and coil winding technology conference Sept. 2003, In, USA, pp. 543-550, doi:10.1109/EICEMC.2003.1247945.

[6] LinY. W., ChouK. F., YehM. J., Wang C., YuS. L., YangC. C., ChangY. C., and LiawC. M., "Design and control of a switched-reluctance motor-driven cooling fan", IET power electronics, Vol. 5, No. 9, pp. 1813-1826, 2012, doi:10.1049/iet-pel.2012.0075.

[7] Khanbabaie Gardeshi, H., Torkaman, H., "Improved Control of Switched Reluctance Motor at High Speeds using Continuous Conduction Mode", Tabriz Journal of Electrical Engineering, Vol. 47, No.1, pp. 69-79, 2017.

[8] Kyohei, K., Sugimoto, H., Chiba, A., "Comparing electric motors: An analysis using four standard driving schedules", IEEE Industry Applications Magazine, Vol. 20, No. 4 pp. 12-20, 2014, doi:10.1109/MIAS.2013.2288380.

[9] Siadatan, A., Shamsabad Farahani, S. S., Afjei, S., "DSP Circuit Design and Manufacturing for Rotor Position Discovering of Sensorless Motor-Generator Switched Reluctance Motor using Amplitude Modulation in Motor Mode", Tabriz Journal of Electrical Engineering, Vol. 48, No.2, pp. 699-710, 2018.

[10] ChenjieL., FahimiB., "Prediction of acoustic noise in switched reluctance motor drives", IEEE Transactions on Energy Conversion, Vol. 29, No. 1, pp. 250-258, 2013, doi:10.1109/TEC.2013.2291702

[11] Santos, D., LMF., Anthonis, J., Naclerio, F., JC Gyselinck, J., Auweraer, H. V. D., CS GóesL., "Multiphysics NVH modeling: Simulation of a switched reluctance motor for an electric vehicle", IEEE Transactions on Industrial Electronics, Vol. 61, No. 1, pp. 469-476, 2013, doi:10.1109/TIE.2013.2247012.

[12] Pere, A., Blanque, B., Martinez, E., Torrent, M., "A novel type of hybrid reluctance motor drive", IEEE transactions on industrial electronics, Vol. 61, No. 8, pp. 4337-4345, 2013, doi:10.1109/TIE.2013.2279384.

[13] Giet, V. D., Lange, M. E., Correa, D. A. P., Chabu, I. E., Silvio I. Nabeta, and Hameyer, K., "Acoustic simulation of a special switched reluctance drive by means of field-circuit coupling and multiphysics simulation", IEEE Transactions on Industrial Electronics Vol. 57, No. 9, pp. 2946-2953, 2010, doi:10.1109/TIE.2010.2051935.

[14] Hyong-Yeol, Y., Lim, Y., Kim, H., "Acoustic noise/vibration reduction of a single-phase SRM using skewed stator and rotor", IEEE Transactions on Industrial Electronics, Vol. 60, No. 10, pp. 4292-4300, 2012, doi:10.1109/TIE.2012.2217715.

[15] Sun, X., Wu, J., Lei, G., Guo, Y., and Zhu, J., "Torque Ripple Reduction of SRM Drive Using Improved Direct Torque Control With Sliding Mode Controller and Observer", IEEE Transactions on Industrial Electronics, Vol. 68, No. 10, pp. 9334-9345, Oct. 2021, doi:10.1109/TIE.2020.3020026

[16] Krishnan, R., Materu, P. N., "Analysis and design of a low-cost converter for switched reluctance motor drives", IEEE Transactions on Industry Applications, Vol. 29, No. 2, pp. 320-327, 1993, doi:10.1109/28.216539.

[17] Mousavi-Aghdam, S. R., Feyzi, M. R., Ebrahimi,Y., "A new switched reluctance motor design to reduce torque ripple using finite element fuzzy optimization", Iranian Journal of Electrical and Electronic Engineering, Vol. 8, No. 1, pp. 91-96, 2012.

[18] Ahmed, M. H., Blasko, V., Lipo, T. A., "A modified C-dump converter for variable-reluctance machines", IEEE Transactions on Industry Applications, Vol. 28, No. 5, pp. 1017-1022, 1992, doi:10.1109/28.158824.

[19] Mir, S., Husain, I., Elbuluk, M. E., "Energy-efficient C-dump converters for switched reluctance motors", IEEE transactions on power electronics, Vol. 12, No. 5, pp. 912-921, 1997, doi:10.1109/63.623010.

[20] Mousavi-Aghdam, S. R., Moradi, A. and Dolatkhah, A. M., "Torque ripple reduction of Switched reluctance motor using improved torque sharing functions", 2017 In Iranian Conference on Electrical Engineering (ICEE), July 2017, Tehran, Iran, pp. 1043-1047, doi:10.1109/IEMDC.2017.8002356.

[21] Dowlatshahi, M., Saghaian-Nejad, S. M., Afshoon, M., Ahn, J. W., "High efficient torque control of switched reluctance motor taking nonlinear and saturation effects into account", In4th Annual International Power Electronics, Drive Systems and Technologies Conference, April 2013, Tehran, Iran, pp. 49-54, doi:10.1109/PEDSTC.2013.6506671.

[22] Zare ChavoshiA., GanjiB., "Online commutation angle control of linear switched reluctance motor with segmental translator", Tabriz Journal of Electrical Engineering, Vol. 48, No.1, pp. 43-51, 2018.

[23] Dong-Hee, L., Liang, J., Lee, Z., Ahn, J., "A simple nonlinear logical torque sharing function for low-torque ripple SR drive", IEEE Transactions on Industrial Electronics, Vol. 56, No. 8, pp. 3021-3028, 2009, doi: 10.1109/TIE.2009.2024661.

[24] Liang, X., Li, G., Ojeda, J., Gabsi, M. and Ren, Z., "Comparative Study of Classical and Mutually Coupled Switched Reluctance Motors Using Multiphysics Finite-Element Modeling", IEEE Transactions on Industrial Electronics, Vol. 61, No. 9, pp. 5066-5074, 2014, doi:10.1109/TIE.2013.2282907.

[25] Turker, Ç. G., Kuyumcu, F. E., Tokan, N. T., "Performance of support vector regression machines on determining the magnetic characteristics of the E-core transverse flux machine", Turkish Journal of Electrical Engineering & Computer Sciences, Vol. 23, No. 3, pp. 698-708, 2015, doi:10.3906/elk-1301-84.

[26] Wichert, I. T., "Design and construction modifications of switched reluctance machines", Ph.D. Thesis, Warsaw University of Technology, 2008.

[27] Lee, D. Y., Hur, J., Hyun, D. S., "An improved C-dump converter system for switched reluctance motors", InProc. International Conference of Electrical Engineering, 2002, Hanyang, Korea, pp. 1027-1030,

[28] Yoon, Y.,Kim, Y., Song, S., Won, C., "Control of C-dump converters fed from switched reluctance motors on an automotive application", Journal of Power Electronics, Vol. 5, No. 2, pp. 120-128, 2005, doi:10.1016/j.epsr.2006.07.005.

[29] Lamchich, M. T., "Torque control" Intechopen, 2011.

[30] Singh, S., and Ganguli, S. G., "Comparative study of various converter topologies of switched reluctance motor drive using P-SPICE", PhD Thesis, Thapar University, 2011.

[31] Vukosavic, S. and Stefanovic, V. R., "SRM inverter topologies: a comparative evaluation", IEEE Transactions on Industry Applications, Vol. 27, No. 6, pp. 1034-1047, 1991. doi:10.1109/28.108453.

[32] Mousavi-AghdamS. R., SharifianM. B. B., BanaeiM. R., "A new method to reduce torque ripple in switched reluctance motor using fuzzy sliding mode", Iranian journal of fuzzy systems, Vol. 9, No. 197-108, 2012, doi: 10.22111/IJFS.2012.228.

[33] Singh, B., Saxena, R., Pahariya, Y., Chouhan, A. R., "Converters performance evaluation of switched reluctance motor in Simulink", International Journal of Industrial Electronics and Control, Vol. 3, No. 2, pp. 89-101, 2011.

[34] Elamin, M., Yasa, Y., Elrayyah, A.and Sozer, Y., "Performance improvement of the delta-connected SRM driven by a standard three phase inverter", IEEE International Electric Machines and Drives Conference (IEMDC), May 2017, FL, USA, pp. 1-7, doi:10.1109/IEMDC.2017.8002356.

[35] Widmer, J. D., Mecrow, B. C., Spargo, C. M., Martin, R. and Celik, T., "Use of a 3 phase full bridge converter to drive a 6 phase switched reluctance machine", 6th IET International Conference on Power Electronics, Machines and Drives (PEMD 2012), March, 2012, Bristol, doi:10.1049/cp.2012.0260.

[36] Khan, Y. A., Twinkle, I. K., Kumar, S. and Verma, V., "Comparative Analysis of Different Converter Topologies for an SRM Drive with Conventional and Vector Control Schemes", 2020 International Conference on Emerging Frontiers in Electrical and Electronic Technologies, 2020, pp. 1-6, doi:10.1109/ICEFEET49149.2020.9187008.

[37] Dowlatshahi, M., Nejad, S. M. S., Moallem, M. and Ahn, J., "Torque ripple reduction of switched reluctance motors considering copper loss minimization", In IEEEInternational Conference on Industrial Technology (ICIT), Feb 2014, Busan, Korea, pp. 858-865, doi:10.1109/ICIT.2014.6895012.

[38] Hua, C., Xu, P., Ma, Q., Ye, W., "Performance analysis of switched reluctance motor based on Maxwell and Simplorer", Chinese Automation Congress (CAC), Oct. 2017, Jinan, China, pp. 6510-6515, doi:10.1109/CAC.2017.8243950.

[39] Jing, J., Lv, S. and Shi, C. f., "Direct torque PID control of switched reluctance motor based on duty ratio control technique", In IEEE International Conference on Mechatronics and Automation (ICMA), Aug. 2015, Beijing, China, pp. 649-653, doi:10.1109/ICMA.2015.7237561.

[40] Fan, J. and Ahn, J. W., "Research on direct torque control of switched reluctance motor with improved commutation strategy", In IEEE International Conference on Industrial Technology (ICIT), Feb. 2018, Lyon, France, pp. 510-515, doi:10.1109/ICIT.2018.8352229

[41] Yufei, H., Ping, X., and Qishuang, M., "Torque ripple reduction of four-phase SRM based on DTC method", InIEEE 3rd Advanced Information Technology, Electronic and Automation Control Conference (IAEAC), Oct. 2018, Chongqing, China, pp. 994-997, doi:10.1109/IAEAC.2018.8577728.