[1] میراحمد، علی، صدرعاملی، سید مجتبی، «مطالعۀ عددی و شبیه‌سازی عملکرد یک مبدل حرارتی پرشده با مادۀ تغییر فاز برای سامانۀ تهویۀ مطبوع یک منزل مسکونی در مناطق گرم و خشک ایران»، نشریۀ علمی‌پژوهشی مهندسی و مدیریت انرژی دانشگاه کاشان، سال پنجم، شمارۀ 2، صفحه ۴۲ـ۵۱، ۱۳۹۴. [2] Radhakrishnan, K.B. and Balakrishnan, A.R., "Heat Transfer Analysis of Thermal Energy Storage using Phase Change Materials", Heat Recovery Systems and CHP, Vol. 12, pp. 427-435, 1990. [3] Kurklu, A., et al., "Mathematical Modelling of the Thermal Performance of a Phase-Change Material (PCM) Store: Cooling Cycle", Applied Thermal Engineering, Vol. 16, pp. 613-623, 1996. [4] Domanski, R. and Fellah, G., "Exergy Analysis for the Evaluation of a Thermal Storage System Employing PCMS with Different Melting Temperatures", Applied Thermal Engineering, Vol. 16, pp. 907-919, 1996. [5] Kurklu, A., "Energy Storage Applications in Greenhouses by Means of Phase Change Materials (PCMs): A Review", Renewable Energy, Vol. 13, pp. 89-103, 1998. [6] Zivkovic, B. and Fujii, I., "An Analysis of Isothermal Phase Change of Phase Change Material within Rectangular and Cylindrical Containers", Solar Energy, Vol. 70, pp. 51-61, 2001. [7] Al-Hallaj, S. and Selman, J.R., "Thermal Modeling of Secondary Lithium Batteries for Electric Vehicle/Hybrid Electric Vehicle Applications", Journal of Power Sources, Vol. 110, pp. 341-348, 2002. [8] Al-Hallaj, S. and Selman, J.R., "A Novel Thermal Management System for Electric Vehicle Batteries Using Phase-Change Material", Journal Electrochemical Society, Vol. 147, pp. 3231-3236, 2000. [9] Sasaguchi, K., Yoshida, M. and Nakashima, S., "Heat Transfer Characteristics of a Latent Heat Thermal Energy Storage Unit with a Finned Tube: Effect of Fin Configuration", Heat Transfer - Japanese Research; (USA), Vol. 19, pp. 11–27, 1990. [10] Sasaguchi, K., "Heat-Transfer Characteristics of a Latent Heat Thermal Energy Storage Unit with a Finned Tube", Heat Transfer - Japanese Research; (USA), Vol. 19, pp. 619–637, 1990. [11] Kizilel, R., Rami, S.J. and Robert Selman, Said A., "An Alternative Cooling System to Enhance the Safety of Li-ion Battery Packs", Journal of Power Sources, Vol. 194, pp.1105-1112, 2009. [12] Duan, X. and Naterer, G.F., "Heat Transfer in Phase Change Materials for Thermal Management of Electric Vehicle Battery Modules", Journal of Heat and Mass Transfer, Vol. 53, pp. 5176-5182, 2010. [13] Sabbah, R., Kizilel, R., Selman, J.R. and Al-Hallaj, S., "Active (Air-Cooled) vs. Passive (Phase Change Material) Thermal Management of High Power Lithium-ion Packs: Limitation of Temperature Rise and Uniformity of Temperature Distribution", Journal of Power Sources, Vol.182, pp. 630-638, 2008. [14] Khateeb, S., Farid, M., Selman J.R. and Al-Hallaj, S., "Design and Simulation of a Lithium-ion Battery with a Phase Change Material Thermal Management System for an Electric Scooter", Journal of Power Sources, Vol. 128, pp. 292-307, 2004. [15] Mahfuz, M.H. and et al., "Exergetic Analysis of a Solar Thermal Power System with PCM Storage", Energy Conversion and Management, Vol. 78, pp. 486-492, 2014. [16] Javani, N., Dincer, I., Naterer, G.F. and Rohrauer, G.L., "Modeling of Passive Thermal Management for Electric Vehicle Battery Packs with PCM Between Cells", Applied Thermal Engineering, Vol. 73, pp. 307-316, 2014. [17] Wang, Z., Zhang, H. and Xia, X., "Experimental Investigation on the Thermal Behavior of Cylindrical Battery with Composite Paraffin and Fin Structure", International Journal of Heat and Mass Transfer, Vol. 109, pp. 958-970, 2017. [18] Jiltea, R.D., Kumara, R., Ahmadi, M.H. and Chenc, L., "Battery Thermal Management System Employing Phase Change Material with Cell-to-Cell Air Cooling", Applied Thermal Engineering, Vol. 161, 2019. [19] Alawadhi, E.M., Thermal Analysis of a PCM Thermal Control Unit for Portable Electronic Devices: Experimental and Numerical Studies, Ph.D. Dissertation, Pittsburg, USA, 2001. [20] Xiongwen, Z., "Thermal Analysis of a Cylindrical Lithium-ion Battery", Electrochimica Acta, Vol. 56, pp. 1246–1255, 2011. [21] Ramandi, M.Y., Dincer. I. and Naterer, G.F., "Heat Transfer and Thermal Management of Electric Vehicle Batteries with Phase Change Materials", Heat Mass Transfer, Vol. 47, pp. 777–788, 2011.